Today, with the continuous development of the Syringe B […]
Today, with the continuous development of the Syringe Blister Packaging Machine, the syringe packaging has also undergone continuous improvement. The original glass material is replaced by a more excellent plastic material. The syringe packaging structure is simple, mainly composed of a tube sleeve, push rod, cap, The piston is composed of a push rod and a scale can be printed, which can effectively ensure the accuracy of medication.
The aseptic treatment of syringe packaging mainly includes ethylene oxide and cobalt 60 sterilization treatment methods, of which ethylene oxide sterilization is mainly gas sterilization, and currently medical equipment is widely sterilized by ethylene oxide. Cobalt 60 sterilization is irradiation sterilization, which is relatively expensive. The main advantages of the two are as follows:
Syringe packaging ethylene oxide sterilization has the following advantages:
1. Can kill all microorganisms, including bacterial spores.
2. Sterilized items can be wrapped and packaged as a whole, and can be kept sterile before use.
3. Does not corrode plastic, metal and rubber;
4. Ability to penetrate irregular shapes.
The characteristics of the syringe packaging cobalt 60 sterilization as irradiation sterilization are:
1. Very penetrating power, no need to unpack the product during irradiation, to ensure that all parts of the product are evenly irradiated, can achieve the effect of sterilization.
2. Irradiation sterilization is carried out at normal temperature and pressure, no residue, no pollution, no residue, convenient and fast.
In recent years, syringe packaging has gradually evolved to use medical-grade plastics, which is light and easy to use, but at the same time there are many types of syringe packaging on the market, so we mainly need to consider the following points when choosing syringe packaging:
1. The size of the volume, the volume of the syringe package should be as close as possible to the amount required for a single feeding, so as to ensure that the injection dose reaches the most appropriate amount.
2. For pumping liquid, first pull the needle tube to the position of maximum capacity, so that the air in the system can be more conveniently exhausted when pumping liquid, in the process of evacuating first, then pumping liquid and then according to the required dosage Adjust the position of the needle tube downward.
3. Accuracy test, before starting work, first set the required dose and test the accuracy of the feeder with twice the scale.
4. After maintenance, the syringe package should be cleaned and disinfected correctly according to the manufacturer's instructions. Ensure that the piston runs smoothly. After drying, drop the syringe and store it in a clean place.
https://www.syringeassemblymachines.com/
